Carpet Cleaning - How to Get Those Oil Stains Off?

  • Posted on: 20 January 2020
  • By: intesols

No matter how much you take care, your carpet is always vulnerable to stains! 

Among various types stains your carpet is prone to, one of the worst types that you’ve to deal with is cleaning an oil stain.  Whether you accidentally drop a plate full of food or someone walked on the carpet with grease-laden shoes, the mere sight of appalling and sticky oil smear sitting on your lush carpet can be extremely distressing. 

Getting rid of oily stains from the carpet, without damaging its softness and shine is almost impossible. Even if you act immediately and remove the stain from the surface, it does get settled within the intricate fabrics of the carpet. Over years, the greasy substance resurfaces, making the blot visible. 

If your carpet has been a victim of oil stain, there’s no need to throw it away or replace it. Here are some perfectly doable solutions at home that will help you with initial fire fighting. However, we recommend you to call a professional carpet cleaning service in Perth to get the most satisfying results. 

Apart from making your carpet spotless, professional cleaners are adept at various tasks like window cleaning, after builder cleaning, rug cleaning, office cleaning and more. 

Using the easily available products at home like cornstarch, you can easily clean the oil stains.

Steps to Remove Oil Stains from Carpet Using Cornstarch

  1. The thumb rule to eradicate greasy smear from the carpet is to act immediately! The quicker you act, the easier it becomes to take off the stain. Make sure to not let the oil/grease seep in the fabrics. 
  2. Take an absorbent dry cloth to gently soak up the oil stain. Make sure you don’t rub the cloth or press it too hard; doing so can make the oil get deeper into the fabric.  
  3. Sprinkle a good amount of powdered cornstarch on the smeared patch to absorb the remaining oil. Leave it for an hour or so. 
  4. Once you start noticing the oil being absorbed by cornstarch, use a vacuum cleaner to remove it. 
  5. Check the area to ensure if there’s any residue. Wash the affected area using water and gentle dishwashing detergent.

If you find that the stain is stubborn and wouldn’t come out easily using the cornstarch, you can also use dry cleaning solvent. 

Steps to Remove the Oil Stains Using a Dry Cleaning Solvent. 

  • 1. Using a dry and clean cloth, apply some dry cleaning solvent to the affected patch. Press the cloth strongly so the solvent permeates deeper in the fabric. Let the solution sit for 5-10 minutes. 
  • 2. Take a damp cloth and blot up the solvent from carpet and allow the area to air dry. You can use a fan or dehumidifier to escalate the drying process. 
  • 3. Once the patch is completely dry, check the carpet for any residue of the oil. If the stain persists, repeat the process. 
  • 4. Word of Caution: It is advisable to test the dry cleaning solvent on a small invisible patch of the carpet, before you apply it on the entire area. 

Though, the ugly-looking oil stains can be difficult to remove, however quick thinking and acting can ensure the blot doesn’t settle and get stubborn. If things get out of control, call a professional carpet cleaning company in Perth. Stormfront Cleaning is a leading cleaning company and specializes in a number of services like carpet cleaning, after builder cleaning, window cleaning, office cleaning and more.